By providing up to 4x better sequential and random transfer performance compared to SATA III Solid State Drives and lower latency than AHCI drives, GOODRAM PX500 gen.2 pumps-up your PC. The performance will improve the work of more demanding customers, offering a reading of up to 2050MB/s. It is also perfect as a stand-alone drive, as well as an add-on to a hard disk in desktops and laptops. Available capacities for the PX500 gen.2 make the drive work in both roles. High performance By creating a disk based on efficient memory in 3D NAND technology, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write. New possibilities with NVMe NVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 gen.2 SSD, we were able to extract the maximum performance from its memory, controller and PCIe Gen 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD. Heat under control One of the problems that concerns M.2 SSD format is the thermal throttling – limitation of efficiency due to too high ambient temperature. To get it under control, PX500 gen.2 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk. 3-year warranty & endurance GOODRAM PX500 gen.2 is available in 256, 512 GB and 1 TB capacities. All sizes are available in M.2 2280 format, with one-sided placement of elements. As the rest of Goodram SSD’s, PX500gen.2 comes up with a 3-year warranty. * TBW (Total Bytes Written) – SSD durability, a parameter that determines the maximum amount of data that can be saved on a drive until the warranty expires. The TBW parameter is defined in the SSD product specifications.