SHAPE FS72BT camera rig Aluminium Aluminium, Red, Silver

V-lock quick release baseplate and insert plate

The SHAPE V-Lock Quick Release Baseplate is a long format baseplate and it can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for ARRI standard handles. It has 1/4″-20 and 3/8″-16 tripod mount threads and a V-lock delta adapter for attaching SHAPE VCT Tripod Plate (VCTSH) or any VCT-14 tripod plate.

The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. (2 pairs) of 15 mm rods (8″ and 4″) are included for the front adn back of the baseplate. For attaching a matte box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15 mm Studio and 19 mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4″-20 and 3/8″-16 screws. The off-center slots allow you to mount your camera offset if you use a 15 mm Studio Adapter. 1/4″-20 and 3/8″-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4″-20 and two 3/8″-16 camera mount screws are included.

The rear insert plate from SHAPE (FS7RIP) is an aluminum rear support plate designed for use with the Sony FS7M2, or FS7 cameras. The plate mounts to the camera body via three included screws and provides necessary support when the camera is used with the SHAPE V-lock quick release baseplate.

Sony FS7M2 top plate

The Top Plate is specially designed for the Sony FS7M2 or FS7 cameras. It is thin and lightweight, but sturdy and durable, made of CNC aluminum. It is also designed with multiple 1/4-20 & 3/8-16 threaded holes, giving you the possibility to attach many accessories. The installation is very simple, you simply have to remove the screw holding the handle on the camera, and insert the top plate from the front side of the handle. The Top Plate cand be strongly secured with (4) 1/4-20 screws included with the package.

Single telescopic handle Arri rosette left side (HAND3)

Left telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort.

SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.